|Burr processing machine|
|Sandblasting machine accessories|
|Shot blasting machine|
、自动喷砂机的储气罐、压力表、安全阀要定期校验。 1. The gas storage tank, pressure gauge and safety valve of the automatic sand blasting machine should be checked regularly. Dust is discharged from the air tank every two weeks, and the filter in the sand tank is checked once a month.
、检查自动喷砂机通风管及自动 喷砂机 门是否密封。 2. Check whether the ventilation pipe of the automatic blasting machine and the door of the automatic blasting machine are sealed. Five minutes before work, the ventilation and dust removal equipment must be started. When the ventilation and dust removal equipment fails, the automatic sand blasting machine is prohibited to work.
、自动喷砂机压缩空气阀要缓慢打开，气压不准超过 0.8MPa 。 4. The compressed air valve of the automatic sand blasting machine should be opened slowly, and the air pressure must not exceed 0.8MPa .
、喷砂粒度应与工作要求相适应，一般在十至二十号之间适用，砂子应保持干燥。 5. The size of the sand blasting should be compatible with the requirements of the work, generally between 10 and 20, and the sand should be kept dry.
、不准用自动喷砂机压缩空气吹身上灰尘。 7. It is not allowed to blow dust on the body with compressed air of automatic sand blasting machine.
、工作完后， 自动喷砂机 通风除尘设备应继续运转五分钟再关闭，以排出室内灰尘，保持场地清洁。 8. After work, the ventilation and dust removal equipment of the automatic sandblasting machine should continue to run for five minutes and then shut down to exhaust indoor dust and keep the site clean.、发生人身、设备事故，应保持现场，并报告有关部门 9. Personal and equipment accidents should be maintained on site and reported to relevant departments